# Volume Of A Sphere Subscribe! My latest posts can be found here:
Previous blog posts:

# Volume of a Sphere

Yesterday (as I type this) Fermat's Library on Twitter tweeted this:

 It was only 282 years ago that Euler presented in his textbooks the exact formula for the volume of a sphere.

Then there was an image with the actual formula: $V=\frac{4}{3}{\pi}r^3$.

Over 12 thousand people "Liked" the tweet, but someone said:

• ... how would you go about proving this one?

So here is how we can prove it.

## Volume of a cone Firstly, think about a cube. We can think of the cube as six pyramids put together with their apexes meeting in the middle. The apex of each pyramid is in the exact centre of the cube, so if the cube has a side length of 1, then the pyramids will have to have "height" $\frac{1}{2}$. Then because there are six identical pyramids we can conclude that each pyramid is one sixth of the volume of the cube.

• So a square-based pyramid of side length 1 and height $\frac{1}{2}$ has a volume of $\frac{1}{6}$.

Imagine doubling the height of the pyramid. That would double the volume, so now the volume is $\frac{1}{3}$.

• So a square-based pyramid of side length 1 and height 1 has a volume of $\frac{1}{3}$.

• If we multiply the height by 5, the volume is now $\frac{5}{3}$;
• If we multiply the height by 8, the volume is now $\frac{8}{3}$;
• If we multiply the height by $h$, the volume is now $\frac{h}{3}$,
• which can also be written as $\frac{1}{3}h$.

Now think about scaling the base. If we make the edges of the base twice the size, the area of the base is four times the size, and the volume similarly increases by a factor of 4. Thinking carefully about this we get the following:

• If the area of the base of a pyramid is $A$,
• and the height is $h$,
• then the volume is $\frac{1}{3}Ah$.

This isn't limited to square-based pyramids, though, it's true of every pyramid and every cone. Take any shape of area $A$ in the plane, and any point above it. Join that point to every point on the rim of the shape to make a cone-like "thing", and the volume of that resulting "thing" is $\frac{1}{3}Ah$.

## Comparing volumes Consider two identical stacks of coins. The volumes of the stacks are the same, and this remains true even if you slide some of the coins sideways to make one of the stacks "wonky".

Using that as our inspiration we introduce "Cavalieri's principle" which says this:

• Given two things standing on a table, if every slice taken parallel to the table results in cross-sections of the same area, then the two things have the same volume.

Basically, if you have two stacks of things, and at every height the areas are the same in each, then the volumes are the same. You can play with an interactive version of the idea here:

So in some cases we can compare volumes as follows:

• Put the two items on a table;
• Take a slice at some height;
• Measure the resulting area of each cross-section;
• If they are always the same,
• the two items have the same volume.

(And yes, that was literally a re-statement of Cavalieri's Principle.)

## The Cone, the (Hemi)-Sphere, and the Cylinder

Now pick some value, $R$, which we are going to use as a radius for a cone, and hemisphere, and a cylinder.

Arrange our cone, hemisphere, and cylinder as follows: Hemi-sphere, Cone, and Cylinder

We have a "side on" view here, seeing the hemisphere, inverted cone, and cylinder, all from the side, and we have taken a slice through them all at some arbitrary height $h$. The three objects here are all of height $R$ and radius $R$, so the sides of the cone are at 45 degrees to the table on which they rest (even though in my rough, hand-drawn diagram they don't look like it).

We know that taking a slice through the cylinder will result in a circle of radius $R$, and hence area ${\pi}R^2$. The slice through the cone will also give a circle, and when we realise that the red triangle is (despite the drawing!) a 45-45-90 triangle, we can see that the radius of the circle will equal the height of the slice, and so the radius of the slice in the cone will be $h$, the height of the slice. So its area will be ${\pi}h^2$.

In the case of the slice through the hemisphere, that will also be a circle, and we can compute its radius (and hence area) by using our old friend, Pythagoras' Theorem. We have a right-angled triangle with hypotenuse the radius of the hemisphere, hence $R$. The height, and hence one short side, is $h$, so we have the equation:

• $h^2+x^2=R^2$

Rearranging that we have $x^2=R^2-h^2$ and so the area of the slice section is ${\pi}(R^2-h^2)$.

## Combining the results

Now for the pay-off. Looking at the slices through the hemisphere and cone, their total area is:

• ${\pi}(R^2-h^2)\;+\;{\pi}h^2$

But that simplifies to be ${\pi}R^2$, which is the area of the slice of the cylinder.

 So using Cavalieri's Principle; the volume of the hemisphere plus the volume of the cone equals the volume of the cylinder.

The cylinder has volume ${\pi}R^3$, because that is the height times the area of the base. The cone has volume $\frac{1}{3}{\pi}R^3$, being one third of the base area times the height. So the volume of the hemisphere is the difference, which is $\frac{2}{3}{\pi}R^3$.

Therefore the volume of the full sphere is twice that.

Thus the volume of a sphere of radius $R$ is $\frac{4}{3}{\pi}R^3$.

A previous blog post gave a different derivation of this result:

There are more pages on these results that you can find by searching for Cavalieri's Principle, Archimedes, and more.

If there's anything on this page that you think is unclear or needs expanding, please let me know and I'd be happy to revisit anything that I think should be enhanced or updated.

Good luck!

 <<<< Prev <<<< Big Oh And Relations : >>>> Next >>>> Pending ... You can follow me on Mathstodon.

 Of course, you can alsofollow me on twitter:  ## Send us a comment ...

 You can send us a message here. It doesn't get published, it just sends us an email, and is an easy way to ask any questions, or make any comments, without having to send a separate email. So just fill in the boxes and then

 Your name : Email : Message :

# Contents Suggest a change ( <-- What does this mean?) / Send me email